Summary

I started by trying to make my own svg file but then saw that i could grab this one from Etsy:
https://www.etsy.com/listing/1257832468/spooky-ouija-board-danglestud-earring?ref=yr_purchases
Great file!! But i did have to tweak a bit to get the size and quality that i wanted.
Example: You may want to make them a little smaller (i did)
I purchased a couple of different jewelry-making kits from amazon so that i could get what i wanted.
One kit had the Posts, jump rings and glue ...
One kit had a lot of different jump rings with different colors like Rose Gold and Antique. I like Steampunk (Antique brass) so I used this color for this project.
I also preferred to have the B7000 Glue that came with this kit because of the viscosity and it has a pin in the cap to keep the spout clear
https://www.amazon.com/gp/product/B09WHRLTKF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I separated the Cut from Score from Engrave and made sure all of the settings were accurate - see above for settings
There were several attempts at the engraving but those were the settings that I liked - you may like something darker (or lighter)
Once they were cut I used a clear coat on both sides (dry in between)
I roughed up the back of the little one where the post goes with a little sandpaper.
I used the B7000 glue to apply the post and let dry.
I used pliers - 2 pair to get the jump rings attached.
They are so cute!!!
(っ◔◡◔)っ ❤