Santa Gnome on a swing ornament
Jo Stapleton
·
6
246
Design Files (1)
  • Gnome swing.xcs
    P2
    • Description
    Made a Santa Gnome on a swing. Used the M1 Ultra to make the print, then cut it out with the P2. Attached the bottom part to the feet of the Gnome and attached the rope through the holes on both sides of the bottom part. Then glued the rope on the back side of the hands and slit the rope through the holes on the smaller piece of wood and made knots on the bottom part and the top part, so the wood would not slide. Then took both ends of the rope and made a knot,
    Production Info
    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool M1 Ultra
    20W
    Material used
    3mm Basswood Plywood
    xTool Basswood and M1 Ultra ink, rope and glue
    Total time
    30 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Setting
    License
    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.
    Do you like this project?