Bottle Opener Jig
gooptroop.ian
·
461
3269
Design Files (1)
  • BottleOpner.xcs
    • Description
    This project is for the F1. 
The cut and engrave settings are in the project for making the template. 
Cut the Base Plate and the Jig and glue them together. You will need to sand the edges for a good fit in the F1. The third tab is for engraving the bottle openers. You will need to set your engrave settings. I have done this in XCS as not everyone will have lightburn or experience with it.

Edit 
Updated XCS file for tab 3 added example text. 
Tested Framing all good   
Remove the Standard Base Plate and fit the jig.
    Production Info
    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool F1
    Material used
    3mm Basswood Plywood
    3mm Plywood from any hardware store
    Total time
    15 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Setting
    Do you like this project?