Summary

Kinetic Coasters - Set 2 - Designed by Ross McSweeney

★FRIENDLY WARNING★ Kinetic Coaster Set 2 is a bit more complicated that Set 1. If you are looking for more of a challenge then I recommend this set!

There are 4 Kinetic Coasters in this set.
●　Each coaster comes with 6 SVG files in 2.5mm, 3mm and 3.175mm (1/8th inch)
●　There are also a few extra files in there which have an explanation about how to use the files. (New acrylic top design, New offset files)
●　I have also made a very detailed instruction book with over 20 pages with easy to follow photos and written text.
●　You will only need 1 thickness of wood to make a coaster~ I highly recommend finding a white candle to wax the gears and some wood glue (which is optional)

You can see a longer video of it in action here
https://www.youtube.com/watch?v=yYgJ5EqRf0A&ab_channel=rossmcsweeney

The finished coaster will be 10cm x 10cm for all sizes

I have arranged the files on a sheet of wood which is 30cm x 30cm - But the coasters only take up about half of the sheet.

This model usually takes me 15 minutes to cut and assemble 1.

Please use the TEST CUT file first. If that file works then you are good to go! 

Good Luck and Happy Cutting!
All the best
Ross